Centrifugal Clutch, Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain 12.7mm pitch for Mini Bike, Go Kart, predator 212, Lawnmower and Honda GC GX 2-6.5HP Engine GC160 GC190 GX120 GX140 GX160 GX200
$27.99
Price when purchased online
Free shipping
Free 30-day returns
Sold and shipped by www.smartifybd.com
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here.
$27.99
Price when purchased online
Free shipping
Free 30-day returns
Sold and shipped by www.smartifybd.com
Free 30-day returns Details
Product details
| Management number | 212782182 | Release Date | 2026/04/06 | List Price | $11.20 | Model Number | 212782182 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
- ★ Centrifugal Clutch, Go Kart Clutch 3/4 Bore 10T for #40 #41 #420 Chain for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included. Please note: the fixed pitch of #40 #41 #420 chain is 12.7mm(0.5 inch)
- ★ Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior
- ★ Works with 2 - 6.5hp Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs Stratton and 2-6.5 HP with 3/4" Shaft and 3/16” key way. Only for versions with a bore diameter of 0.75“ (19.05mm). Not for with a bore diameter of 0.787” (20mm) Tecumseh Engines 2-6.5 HP with 3/4" Shaft and 3/16” key way. Engagement Speed: 2300±300 RPM
- ★ Tooth: 10 Tooth sprocket for #40/41/420 chain, However, the chain in our set is #420, the roller diameter and inner wall width of #420 chain and #40 or #41 chain are not the same, so please confirm the chain model you need before placing an order
- ★ Package included: 1 x Centrifugal Clutch, 1 x #420 Chain(96 links, 48 inches) and 1 x Connecting Link
- ★Installation Suggestions: Before installation: you need to drip a circle of lubricant above the circlip and wait for it to seep in, then rotate the clutch and turn it without any obstruction. After installation: when it is just mounted and start to run, you need to break it in 3-5 times to make the Clutch Shoes get enough friction. No-load operation until the clutch first engagement to keep 10s and then turn off the engine to cool down, after that load repeat the above operation 3 times, speed from 0 to extreme speed, each interval of two minutes to cool down. After that it is ready for normal use
| Brand | ILONPA |
|---|---|
| Model | BUTOC003S |
| Exterior | Painted |
| Item Weight | 4.24 pounds |
| Manufacturer | ILONPA |
| Item model number | BUTOC003S |
| Product Dimensions | 4 x 4 x 4 inches |
| Manufacturer Part Number | BUTOC003S |
Bestseller ranking
Clutches
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form