Hot Melt Glue Machine,110v Commercial Adhesive Dispenser Equipment 0-300°C Multiple Functional Countertop Hot Melt Glue Dispenser for Shoemaking,Toys,Box Sealing, Packaging Bonding Fixing

DescriptionA good tool is indispensable for tedious operations. Our hot melt glue dispenser can help you do it. Made of iron and aluminum, and adopting exquisite painted technology, this item ensures that you can use it for a long time. Good performance and simple operation can make your work more efficient. It will be a powerful assistant in your work.DetailsTrapezoidal Base: The solid trapezoidal base can provide additional support to better maintain the stability of the product.Long Power Cord: This 6.56ft power cord allows you to have plenty of disposable lengths, thus reducing the limitation when you use it.Round Corners: The arc design can effectively prevent your skin from being scratched compared with the traditional square corners.ApplicationThis product can be widely used in manufacturing plants, workshops, construction sites, and stores for shoemaking (insole spray), toys (adhesive, fixation, insulation), box sealing, packaging, handbags, leather goods, leather bags, small household appliances,wires, hardware, small paper products, small ornaments, handicrafts, hairpins, electronic products, DIY design, and other manual or semi-automatic products that need glue.Preparation for Operation:1. Confirm the safety protection measures.2. Check if the machine is 110VAC and make sure that the pressure will not fluctuate.3. See if the temperature of the plastic bucket is set at about 302°F(different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier).4. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.5. Check if the air supply system is basically dry and the air pressure is stable6. Power on and test the circuit of each part.Boot Steps:1. Connect the power and turn the power switch to “ON”.2. Check if the temperature of the temperature controller is within the above range.3. Check whether the pressure relief is turned in the direction of pressure holding.4. Connect the origin, set the pressure value, and start the operation.Shutdown Steps:1. Release the foot switch to cut off the main power2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0.SpecificationColor: BlueModel: YT-X001Material: Iron and AluminumSurface Treatment: Painted, Sprayed with TeflonStyle: ModernShape: RectangularNumber of Items: 1Assembly Required: YesMount Type: CountertopVoltage: 110V 10APlug Model: PSB-10Max Power: 1250WMax Voltage: 10A 125VSol Speed: 3kg/h, 6.61lbs/hSolvent Capacity: 3kg/h, 6.61lbs/hMaximum Viscosity: 10000 CPSPlug Type: US StandardPower: 800WWorking Temperature: Over 150°C/302°FTemperature Control Range: 150-200°C/302-392℉Pressure Range: 4~10kg/8.82~22.05lbsLength of Power Cord: About 2m/6.56ftPackage Included1* Hot Melt Glue Dispenser1* Pedal Switch1* Conversion Plug1* Pressure GaugeNotes1. Please always wear safety gloves, goggles, and long-sleeved work clothes(not included) during use to avoid burning hot liquid hot melt adhesive. Before heating the melted glue, the pressure of the storage tank must be released first. After adding the sol, the lid of the glue tank must be locked.2. Please note that the gas circuit should avoid too much water vapor entering. The capacity of hot melt adhesive should not exceed one-seventh of the capacity of the storage tank.3. In order to achieve a better result and avoid damage, please set the minimum air pressure to 8.82lbs and the maximum temperature to 392℉.4. Please note that this product needs to be used with an air compressor, so you need to prepare it in advance.5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• 💡【Premium Material】: High-quality iron and aluminum make this product solid, wear-resistant, impact-resistant, and rustproof, so it can keep beautiful and practical without frequent replacement.
• 💡【Multiple Functions】: It is mainly used for gluing in product processes, application to the exact position of each product, and can be used for dotting, marking, circular or arcing.
• 💡【Safety Guard】: The uniform heat dissipation holes, pressure retaining design, and over-temperature protection function can timely reduce the temperature of the product during operation, avoid potential safety hazards, and extend the service life of the product.
• 💡【Adjustable Design】: The temperature can be adjusted in the range of 302-392℉, and the pressure can be adjusted in the range of 8.82-22.05lbs, which are very convenient and conducive to making more beautiful and standardized items.
• 💡【Simple Installation and Operation】: The simple structure, convenient switches, practical pedal, clear pressure gauge and indication, and two models(manual and automatic) allow you to complete the installation and accurately control the amount of glue and free up your hands.